SKU:
LK-CA-DEF-6-HD8-ECO
BRAND:
SuperATV
It’s Crazy What 6” Can Do
It’s time to pack up the camping gear and go for a weekend of off-roading with your buddies. Prepare your Defender by installing SuperATV’s 6" Lift Kit so you can ride through deeper mud and roll over large rocks without getting stuck. It gives you 17” of total ground clearance and room to run 34” tires. And the best part—the components of this lift kit are all made to be superior in strength: chromoly A-arms, chromoly Rhino 2.0 Axles, tie rods, and lift brackets. You’ll be turning heads and hammering through tire-deep mud holes with little effort.
End-to-End Chromoly Parts
We’ve built this entire kit around strength. Our A-arms are 1.25” in diameter—75% thicker than OEM. And the tie rods are made from a solid chromoly bar, while our lift brackets are constructed with 4.5 mm heavy-duty steel. Plus, it comes with four of our premium Rhino 2.0 Axles. We’ve been perfecting our lift kits for years, so we know what it takes to stand out in a crowd and support rough rides.
The Feel of Your Machine Stays the Same
Just because you added clearance and bigger tires to your machine doesn’t mean that you lose the comfortability you had before. We paid attention to the angle of your shocks and brackets so your ride is still smooth like butter, and your turning radius doesn’t suck.
The Complete Package
When you order our Can-Am Defender HD8 6” lift kit, you get everything you need including—Rhino 2.0 Axles, an all-new suspension setup, brake lines, and the required steering stops. We even include self-lubricating UHMW bushings and zinc-plated steel sleeves. You’ll have your Defender pushing the limits in no time.
NOTE: This 6” lift kit disables the front and rear sway bars.
KIT INCLUDES
It’s time to pack up the camping gear and go for a weekend of off-roading with your buddies. Prepare your Defender by installing SuperATV’s 6" Lift Kit so you can ride through deeper mud and roll over large rocks without getting stuck. It gives you 17” of total ground clearance and room to run 34” tires. And the best part—the components of this lift kit are all made to be superior in strength: chromoly A-arms, chromoly Rhino 2.0 Axles, tie rods, and lift brackets. You’ll be turning heads and hammering through tire-deep mud holes with little effort.
End-to-End Chromoly Parts
We’ve built this entire kit around strength. Our A-arms are 1.25” in diameter—75% thicker than OEM. And the tie rods are made from a solid chromoly bar, while our lift brackets are constructed with 4.5 mm heavy-duty steel. Plus, it comes with four of our premium Rhino 2.0 Axles. We’ve been perfecting our lift kits for years, so we know what it takes to stand out in a crowd and support rough rides.
The Feel of Your Machine Stays the Same
Just because you added clearance and bigger tires to your machine doesn’t mean that you lose the comfortability you had before. We paid attention to the angle of your shocks and brackets so your ride is still smooth like butter, and your turning radius doesn’t suck.
The Complete Package
When you order our Can-Am Defender HD8 6” lift kit, you get everything you need including—Rhino 2.0 Axles, an all-new suspension setup, brake lines, and the required steering stops. We even include self-lubricating UHMW bushings and zinc-plated steel sleeves. You’ll have your Defender pushing the limits in no time.
NOTE: This 6” lift kit disables the front and rear sway bars.
KIT INCLUDES
- Front and rear lift brackets
- Front and rear spring spacers
- Front and rear A-arms
- 4 Rhino 2.0 axles
- Heavy duty tie rod kit
- Extended brake lines
- All hardware and installation instructions
- 17" of ground clearance (up from 11" stock)
- Run up to 34” tires (up from 27” stock)
- Preadjusted pivot blocks give you perfect camber out of the box
- Includes 4 bulletproof Rhino 2.0 axles
- Lifetime Warranty on all A-arms and brackets
- The ONLY chromoly lift kit for the Defender
- Chromoly ball joint housings
- Chromoly pivot blocks
- Chromoly A-arms from end to end!
- True 6” of lift
- 7” wider stance for increased stability (69" wide total)
- Compatible with OEM and SuperATV heavy-duty ball joints
- Powder coated for increased durability
NOTE: This 6" Lift Kit disables the front and rear sway bars.
Rhino 2.0 Features:
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: Massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18-month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
