Send us your question. We'll contact your shortly!
A-Arms and A-Arm Guards
If you broke an a-arm on your Can-am Maverick or are looking to preemptively upgrade your machine’s a-arms, you’re at the right place. At Everything Can-Am Offroad, we’ve got the best Can-am Maverick a-arms and a-arm replacements for you and your UTV. Even if you’ve already upgraded the a-arms on your Side by Side, you can never go wrong with a set of Can-am Maverick a-arm guards. With aftermarket UTV a-arms and a-arm guards from leading power sports companies like HCR and CT Raceworx, you’re guaranteed to get the highest quality products that will withstand the roughest of terrain. Get a complete a-arm kit with axles and trailing arms, or a single a-arm or a-arm component — it doesn’t matter, we’ve got it all. From standard OEM a-arms to high-clearance a-arms, you can find it all right here at Everything Can-Am Offroad!
When installing new Can-am Maverick a-arms, the bushings and ball joints have to be either reused or swapped for new ones. If you are mechanically inclined and have a ball joint press, you can handle it no problem. If you use your local mechanic or dealer to do the install, make sure you tell them to install the ball joint. Dealers will likely try to sell you a $175 Keller ball joint or some other high end ball joint. These ball joints are great, and definitely higher quality than OEM ball joints, but if you are mild to moderate in your driving style, stock ball joints are fine. Hard racing deserves Kellers or the like, but a lot of riders won’t see that much benefit from running expensive a-arm ball joints in their Mavericks. Nevertheless, if you’re in need of a new front or rear a-arm, a-arm bushing, or a-arm ball joint, look no further than Everything Can-Am Offroad for all your a-arm needs.
Do you have a Can-Am Maverick and have been wondering what to do about getting some additional ground clearance without actually adding a lift kit to your UTV? If you have given it some thought then a set of High Clearance Boxed Front A-Arms from SuperATV may just be what you want for your ride. They give you that added room in your undercarriage that would make all the difference depending on just how rugged the terrain that you are traversing is. This is just one of the many options available to you and your machine and the wonderful thing about all of the parts that we carry is that you can be sure that they are of the highest quality. Brought to you by some of the best brands in the UTV aftermarket parts industry, these A-Arms, and A-Arm Guards are the standard by which you can compare the rest of the parts you plan to buy for your UTV by. We carry A-Arms and A-Arm Guards for all the models of Maverick including the Maverick MAX, Maverick Sport, Maverick Trail, Maverick X3 and the Maverick X3 MAX. Choose from the best so that you can get the best performance out of the parts that you add to your Side by Side.
Embrace the high life when you ride out in your 2020 Can-Am Maverick. Get the benefits of height, performance, and stability with A-Arm and A-Arm Guards from Everything Can-Am Offroad. Switching to newer and better A-Arm and A-Arm guards allows you to enjoy extra lift and support and an improved ride quality that is more consistent with new shocks, lift kits or monster tires. Adding that protective layer can be the difference between severe misalignment and expensive wear and tear, and a high-performing rig. Up to 2 inches of height can be added to your machine without a lift kit. You can get a Trail 4-Piece A-Arm or CV Boot Guard Set for your 2020 Can-Am Maverick, 3/8 inch UHMW Front Lower A-Arm Guard for your 2020 Can-Am Maverick MAX or 72 inch Model Front Forward Upper and Lower Control Arms for your 2020 Can-Am Maverick X3. We also have parts available for your 2020 Can-Am Maverick X3 MAX, your 2020 Can-Am Maverick SPORT and your 2020 Can-Am Maverick TRAIL. Get A-Arm and A-Arm Guards for your side by side from Everything Can-Am Offroad.