Do More with More Suspension
Driving in rough terrain is one thing. Pushing your Defender to its limits in rough terrain is another. Can your stock A-arms keep up? We know our Atlas Pro 1.5” Rear Offset A-Arms can. Their tubing is bigger and better, measuring 1.5” in diameter. They’re also 0.5” larger than stock and 0.25” larger than our standard A-arms. They amplify your clearance, making your rig look big, bad, and powerful. Plus, they come with a 1.5” offset and let you run 30” tires in the back.
Atlas Pro Tubes Are Badass
These Atlas Pro A-arms are large and beefy. They’re the biggest A-arms we have ever designed. The enlarged tubing is 1.5” diameter with a 1.38” wall. And while you’re on the trail, it gives you the strength you need and the reliability you count on. Half an inch bigger than stock may not sound big, but the difference is huge when it comes to A-arms. Plus, we finish them with a UV-resistant powder coating to increase durability and corrosion resistance.
Rear Offset = More Stability
The design of these Can-Am Defender HD8 control arms gives you an additional 1.5" of ground clearance, allowing you to ride over stumps and rocks you’d pass up in the past. And they come with a 1.5” rear offset, adding length to your wheelbase by moving the wheel hubs 1.5" backward. The offset allows you to run up to 30” tires without adding a lift kit. The trail is at your mercy with larger tires, more ground clearance, and a 1.5” offset.
Adjustable Pivot Blocks
Our high-clearance A-arms also come with adjustable pivot blocks, giving you the ability to change your camber. It’s important when adding a lift kit or larger tires that you pay attention to your camber to eliminate premature wear on your tires. To keep the stress off you, we’ve also pre-adjusted your pivot blocks to match your machine's stock specifications, so you don’t have to mess with them if you don’t want to.
Atlas Pro Rear Offset A-Arms Features:
- Adds 1.5” of rear offset
- Fit up to 30” tires
- Made with 1.5” x .138” wall steel DOM tubing
- 0.5” larger than stock
- 0.25” larger than our standard High-Clearance 2” Rear Offset A-Arms
- Adjustable pivot blocks for full camber adjustability
- Utilizes stock A-arm bushings
- UV-resistant powder coat finish
- Easy to install
WARNING:
This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For More Information, go to
https://www.P65Warnings.ca.gov
